Acrylic Polymers

An all acrylic polymer curing agent for Glass Fibre Reinforced Concrete

Polycure FT and Polycure FT Extra eliminate the need for moist curing of GRC products.

  • Reduces the quantity of water required
  • Easy to dose
  • Can be used with additional plasticisers or super plasticisers
  • Contains an antifoaming agent
  • Will free up factory space reserved for curing

Download the Polycure FT brochure

Download the Polycure FT Extra brochure

Large stocks of Polymer are available for immediate despatch from our UK warehouse to Europe and the rest of the world.

Polycure FT Polymer for GRC

Why use the Polycure FT Curing System?

Cementitious products should be moist cured to ensure that there is sufficient retained moisture for complete hydration of the cement. This is particularly critical for thin skin GRC products.

When Polycure FT or FT Extra is added to the mix at the recommended dosage it forms a film within the matrix during the first few hours of curing. The formation of this film significantly reduces the permeability and thus lessens the loss of water by evaporation ensuring that sufficient water is available for complete hydration.

Comments are closed.